Jump to a service
Dallas, TX
Garage door panel replacement in Dallas, Texas
One damaged section can often be swapped without replacing the whole door. Whether it can comes down to whether the manufacturer still makes that panel, in that design, in that colour.
Panels in Dallas
In older Dallas neighbourhoods the header and jambs are frequently older than the door hanging on them, so the structure gets checked before anything gets quoted. Aluminum sectional doors were common in mid century construction, light enough to lift easily and soft enough that a dent stays put. The skin is thin and often a mill or anodized finish, which no painted steel panel will match. Sections for those doors left production long ago, so a damaged one is straightened and filled in place rather than exchanged. Steel that has been stretched by an impact will not come back to its original shape, which is the line between pushing a shallow dimple out and replacing the section. A crease that runs across a stamped rib has stretched the metal along that line. Filler bridges the low spot but sits on a panel that flexes every cycle, so it eventually cracks at the edge. A single panel swap is usually two to three hours.
What that means for a Dallas door
Replacing a section changes the weight of the door slightly, and an insulated replacement in a run of single layer sections changes it more. Openers installed before 1993 predate the requirement for photo eyes in the United States, so the only obstruction protection is the force setting, which was tuned to the door as it was. Force and limits are worth rechecking after the section goes in. Paint on a door from before 1978 may be lead based, since residential lead paint was banned in the United States that year. Sanding or burning off old layers on a wood door of that age releases the dust the rule exists to control. Wet scraping and containment shape how a panel repair proceeds long before new material is cut.
Signs you are dealing with this
- Hail has dimpled one or two panels but the rest are sound
- A panel is cracked, split or rusting through at the bottom edge
What we check on arrival
- Hinge and strut condition at the damaged section
- Colour and finish match against the weathered existing sections
$350 to $1400
One section on a common current door line is at the low end. Multiple sections, or a discontinued design that needs a full-door match, runs higher.
This is a range, not a quote. The exact price comes after we see the door and you approve it before any work starts. Call (469) 281-7750 and describe what it is doing.
Dallas at a glance
- County
- Dallas County
- Drive from our Coppell base
- About 30 minutes from our Coppell base
- Postcodes covered
- 75201, 75206, 75214, 75218, 75220, 75225, 75228, 75230, 75243
- Around
- Bishop Arts District, White Rock Lake, Deep Ellum
Before we get there
A dented section can hide a bent strut or hinge behind it. Replacing the skin without checking the structure puts the load back onto damaged parts.
About Dallas
Detached alley garages in the older neighbourhoods often have no opener at all, or one added decades later with improvised bracing.
Dallas County. About 30 minutes from our Coppell base.
What that means for a door here
In older Dallas neighbourhoods the header and jambs are frequently older than the door hanging on them, so the structure gets checked before anything gets quoted.
We work throughout Dallas, including the neighbourhoods around Bishop Arts District, White Rock Lake, Deep Ellum.
Get a price
Tell us about your Dallas door
Describe what the door is doing and somebody will call you back. The estimate on site is free. We are about 30 minutes away, and Dallas sits in Dallas County.
A person answers 7am to 11pm.
Questions
Panels in Dallas, asked and answered
Do you cover Dallas?
Yes. Dallas is in Dallas County, and it is one of the 32 cities covered from the Coppell base. About 30 minutes from our Coppell base. That covers postcodes 75201, 75206, 75214, 75218, 75220, 75225, 75228, 75230, 75243.
What usually fails on a Dallas door?
Section work needs floor space the length of the door. A section has to come out of the opening and lie flat somewhere while the hinges are unbolted, and the new one needs the same room before it goes up. On a narrow lot or a garage set close to a fence, that space is usually the driveway.
How long does garage door panel replacement take in Dallas?
A single panel swap is usually two to three hours. Older sectional doors were frequently built in five sections to a 7 foot height rather than the four that most current doors use, which makes each section shorter. Section height has to match for hinges to land on the existing lines, so a panel design that looks right in a catalog can still be the wrong depth for the door taking it.
Is the work guaranteed?
Parts and labour carry a 5 year warranty. The price is agreed before any work starts, and the on site estimate is free.
Is there anything specific about garage doors in Dallas?
Detached alley garages in the older neighbourhoods often have no opener at all, or one added decades later with improvised bracing. Hail dents a single layer steel door because the skin is the only thing between the stone and open air behind it. A strike that lands between struts pushes the steel in and it stays in, since there is no core to spread the load. The dimples read most clearly on a flat or lightly embossed panel, where no stamped pattern breaks up the reflection.
Get it fixed
Get a panels price for your Dallas door
Tell us what it is doing. The estimate on site is free.